The gold and black lines on the side of our Tiara Express 35' 2001 are starting to fade in areas. Anyone has been able to improve the appearance of this and how? Picture included
You’ll take 20 years off the apparent age of the boat if you just remove them. Get a package of plastic razor blades off Amazon and some spray Goo-Gone and go to town. Comes off pretty easy. A little compound and polish (and sunlight) and it’ll be like it’s never there.
Author's Statistic:
Posts: 13
Threads: 0
Likes Given: 0
Likes Received: 1 in 1 posts
Joined: May 2016
Home Port: Lake St. Clair, MI
Vessel Info: 31 Open 1996, Cruisaders
Posts: 13
Threads: 0
Likes Given: 0
Likes Received: 1 in 1 posts
Joined: May 2016
Home Port: Lake St. Clair, MI
Vessel Info: 31 Open 1996, Cruisaders
They are stripes you can order from here. [Only registered and activated users can see links Click here to register]. Get a 3M Rubber wheel to remove, as fast as you can move will remove it and the adhesive. Plus no damage to the gel coat. [Only registered and activated users can see links Click here to register]
Author's Statistic:
Posts: 58
Threads: 9
Likes Given: 5
Likes Received: 15 in 10 posts
Joined: Jun 2019
Home Port: NY, Long Island, South shore
Vessel Info: 1998 4000 Express, Cat 3208
Posts: 58
Threads: 9
Likes Given: 5
Likes Received: 15 in 10 posts
Joined: Jun 2019
Home Port: NY, Long Island, South shore
Vessel Info: 1998 4000 Express, Cat 3208
04-13-2021, 04:30 PM (This post was last modified: 04-13-2021, 04:32 PM by Uhehner.)
(01-25-2021, 09:17 AM)BVTeam Wrote: The gold and black lines on the side of our Tiara Express 35' 2001 are starting to fade in areas. Anyone has been able to improve the appearance of this and how? Picture included
I took the old tape off as described and first installed 5/16 tape to use as a guide. Then butt the gold and black tape to the 5/16 to get a nice even space. Pull off the 5/16 and it's perfect. I used 3M tape from an auto parts store. Capt. George
(01-25-2021, 04:58 PM)Hot Shot Wrote: [Only registered and activated users can see links Click here to register]. Get a 3M Rubber wheel to remove, as fast as you can move will remove it and the adhesive. Plus no damage to the gel coat. [Only registered and activated users can see links Click here to register]