Posts: 49
Threads: 12
Joined: Dec 2010
Reputation:
0
My 2007 Open has spots on the TaylorMade tempered glass, perhaps from rain, perhaps from washing; just not sure of the source. Any recommendations on how to clean these windows?
These spots are heavy enough to make the windows a bit cloudy, harder to see through than they should be. Recently installed new canvas and the new clear side curtains accentuated the lack of clarity in my tempered windows.
I have tried, spot tested, lime removal products, but they made no change.
Suggestions and comments welcomed.
Posts: 96
Threads: 6
Joined: Jun 2011
Reputation:
1
Home Port: North East
Vessel Info: 2005 4400 Sovran
Cummins QSM-11 660HP
Prism Polish worked wonders on my 2005 Tiara, it took the water spots off no problem.
Posts: 702
Threads: 14
Joined: Dec 2010
Reputation:
11
Home Port: Kings Park, NY
Vessel Info: 2003 38' Open Cummin's 6CTA's (450 hp)
I had the same issue on my 38 Open. Went to a windows/glass/mirror business and purchased a cleaner that is used to clean bathroom glass enclosures...... Really worked well... Windshield looks like new. No more spots that I couldn't clean........ Think it's the same stuff Auto stores have that is used to clean/clear plastic headlamp covers. M2C.....
Posts: 702
Threads: 14
Joined: Dec 2010
Reputation:
11
Home Port: Kings Park, NY
Vessel Info: 2003 38' Open Cummin's 6CTA's (450 hp)
My experience (see my earlier post) is it took significant effort and repeated applications (what I purchased from the glass/bathroom enclosure business) to address and completely remove ALL water spots (its calcium I think).... Lots of elbow action, i.e. "wax on/wax off". BTW the business owner stated it would require lots of elbow action and repeated applications if really bad...... Now I do the windshield glass as part of my yearly maintenance and it seems its clear of what I call water spots...... M2C
Posts: 494
Threads: 22
Joined: Apr 2012
Reputation:
5
Home Port: Stuart, FL
Vessel Info: 1988 36' Convertible with new 8.1 Crusaders.
Exceptional condition, inside, outside, bilges and engines.
10-18-2015, 07:12 PM
(This post was last modified: 10-18-2015, 10:30 PM by Uhehner.)
I have used NOVUS #2 Light Scratch Remover, Soft Scrub and plain white tooth paste to clean various glass problems. I put it on a buffing pad and use my random orbital sander. If I thin the paste with vinegar it helps to soften the calcium deposits. Capt. George
Posts: 453
Threads: 30
Joined: Feb 2013
Reputation:
0
It depends on what type of minerals are on the glass (hard water spots). It also depends on how long they have been there.
Look for cleaners that are designed to remove hard water deposits. You may have to resort to an acid based cleaner (be very careful and don't get it on metal!).
Good Luck!