Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Aft Deck Seating
#1
Hi,

Any idea where I can find aft deck seating similar to the bench that Tiara use to option? It was flat bench with folding legs. Just got a message from Tiara that they don't offer this anymore and the original manufacturer is out of business. Below is a little more detail provided by Tiara Customer Service.

"The removable option was simply a bench seat that was on four trapezoidal legs, held down by quick release pins, but here again there were components involved that we can no longer get (such as the pin receptacles that were mounted in the deck)."

Any ideas, advice or if you have for sale, please let me know. Thanks again!

Eric

Here is a picture of what I believe they look like.

[Image: 5050167_20150407172552785_1_XLARGE.jpg&w...1963284000]
Reply
#2
I have the two starboard pieces that you need from my "88 31 Open. They measure about 24 X 42 X 3/4 inches and are very heavy. The brackets shown in your picture went with the boat when I sold it. My brackets did not fold, they were exactly like those in your picture. There were 5/16 - 18 SS knobs and studs that screwed into the deck to hold them in place as your picture shows. I still have two of them for sale on eBay. I sold the remainder. Search under "Tiara". Capt. George
Reply
#3
Go online to Birdsall Marine Design.  They offer a folding rear bench seat in a variety of sizes

Good luck.
Reply
#4
http://www.boatoutfitters.com/gem-folding-seat-bracket

Enclosed link has some folding brackets I have seen some Tiara's use as well. Just have to make sure it is fastened to the rear deck very well. You would have to have a seat made but might be a nice feature since it will fold out of the way. 
Tom
Reply
#5
(11-25-2015, 04:56 PM)trit21 Wrote: http://www.boatoutfitters.com/gem-folding-seat-bracket

Enclosed link has some folding brackets I have seen some Tiara's use as well. Just have to make sure it is fastened to the rear deck very well. You would have to have a seat made but might be a nice feature since it will fold out of the way. 

I have a Tiara factory molded box or bench seat that was used on my 1989 33' open...It has a naugahide white cushion top and the shape of the box is designed to fit in the back transom area. Let me know if your interested Ill sell it cheap....$100
Reply
#6
(11-25-2015, 02:02 PM)Uhehner Wrote: I have the two starboard pieces that you need from my "88 31 Open. They measure about 24 X 42 X 3/4 inches and are very heavy. The brackets shown in your picture went with the boat when I sold it. My brackets did not fold, they were exactly like those in your picture. There were 5/16 - 18 SS knobs and studs that screwed into the deck to hold them in place as your picture shows. I still have two of them for sale on eBay. I sold the remainder. Search under "Tiara". Capt. George
Reply
#7
Did Tiara say they have a source for the legs?
(11-25-2015, 12:29 PM)eric_nelson Wrote: Hi,

Any idea where I can find aft deck seating similar to the bench that Tiara use to option? It was flat bench with folding legs. Just got a message from Tiara that they don't offer this anymore and the original manufacturer is out of business. Below is a little more detail provided by Tiara Customer Service.

"The removable option was simply a bench seat that was on four trapezoidal legs, held down by quick release pins, but here again there were components involved that we can no longer get (such as the pin receptacles that were mounted in the deck)."

Any ideas, advice or if you have for sale, please let me know. Thanks again!

Eric

Here is a picture of what I believe they look like.

[Image: 5050167_20150407172552785_1_XLARGE.jpg&w...1963284000]
Reply
#8
HI,

Spoke with factory and they dont have source for legs or any specs.

Eric
Reply
#9
(11-25-2015, 02:02 PM)Uhehner Wrote: I have the two starboard pieces that you need from my "88 31 Open. They measure about 24 X 42 X 3/4 inches and are very heavy. The brackets shown in your picture went with the boat when I sold it. My brackets did not fold, they were exactly like those in your picture. There were 5/16 - 18 SS knobs and studs that screwed into the deck to hold them in place as your picture shows. I still have two of them for sale on eBay. I sold the remainder. Search under "Tiara". Capt. George

Capt. George
I purchased a 2001 coronet last year. The deck chairs shown in the photo came with my boat but the previous owner didn't have what he called the pins anymore. I have been trying to search for them online but I have had no success. The parts that I need to fasten the chairs down are the 15/16-8ss knobs you listed?


Sent from my iPhone using Tapatalk
Reply
#10
I sold all the knobs and threaded rods I had on eBay. Why not just go to ACE Hardware and purchase 5/16- 18 Stainless Hex Head bolts at what ever length you need? Add a flat washer and be done with it. Capt. George
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Acrylic deck hatch lens giff1 2 1,562 03-10-2024, 12:42 AM
Last Post: HIGH SPIRTED
  deck cushions honest mark 2 1,842 07-24-2023, 06:16 PM
Last Post: honest mark
  deck lights honest mark 6 3,914 07-22-2023, 11:04 AM
Last Post: honest mark
  3300 Deck Removal Lucky Dog 33 11 9,571 12-29-2022, 05:30 PM
Last Post: cp4000
  Swim platform deck options d5dekeyser 0 1,341 08-16-2022, 09:39 AM
Last Post: d5dekeyser



Users browsing this thread: 1 Guest(s)
Advertisements

Latest Threads
3500 Open deck lift piston
Last Post: hiccup
Today 08:10 AM
» Replies: 4
» Views: 1101
Oil Filter ?
Last Post: ReelMagic
Yesterday 04:23 PM
» Replies: 7
» Views: 1619
Unknown noise from Tiara 3800 Open engi...
Last Post: liambrown
Yesterday 01:54 PM
» Replies: 4
» Views: 537
Tiara 40 Express 2003 - Removal of Cleat
Last Post: saywhen
11-14-2026 05:25 PM
» Replies: 2
» Views: 380
3500 Sovran trimtabs
Last Post: drprunner
11-14-2026 03:44 PM
» Replies: 0
» Views: 58