Posts: 494
Threads: 22
Joined: Apr 2012
Reputation:
5
Home Port: Stuart, FL
Vessel Info: 1988 36' Convertible with new 8.1 Crusaders.
Exceptional condition, inside, outside, bilges and engines.
That's great information. I could not find a source. The original knobs looked exactly like the DAVIES model and were 1-1/4" diameter with a 5/16-18 female brass insert. They were 3/4 " high. Just add a 5/16-18 stainless rod cut to the desired length and put some Loc-tite on the threads going into the knob. Capt. George
Posts: 494
Threads: 22
Joined: Apr 2012
Reputation:
5
Home Port: Stuart, FL
Vessel Info: 1988 36' Convertible with new 8.1 Crusaders.
Exceptional condition, inside, outside, bilges and engines.
If you search on the web or eBay look for 6CXY8 or 3008BG. Both numbers will get you the knob.
On my 31 Open the deck was fitted with an aluminum block in the fiberglass that was drilled and tapped to 5/16-18. Unfortunately Tiara used a poor choice of aluminum that corroded big time and caused the fiberglass deck to bulge up.
If you drill into the deck you MUST seal the hole against water getting to the balsa core.
Capt. George
Posts: 12
Threads: 4
Joined: Sep 2016
Reputation:
0
Did you find these seats. I have this exact set out of my 3100 open. Brand new. Upholstery and wood. Would consider selling as I do not use them... 607.426.5919 we are strictly a fishing boat.
Sent from my SM-G900V using Tapatalk