[rose_surfer]

Just finished my first project in my 89 3100 open - mounted a 19" 12V tv/dvd combo.  Decided to use an articulating wall mount rated for a 42" plasma just to make sure there wouldn't be any issues whatsoever with dynamic loads.  I installed it on the galley bulkhead so that depending on how you swing it, its viewable from the v-berth, dinette, or both.  

I wanted to power the tv by 12V so I had to install a new 12V outlet in the galley.  This part didn't go so well. Decided on a 12V socket/dual usb combo for extra utility, that I installed just above the existing 110V GFI.  Anyone thinking of copying this setup beware - do not mount the outlet where I did.  There's probably room to mount a single outlet, but the double was too big, and I ended up having to route out portions of the strips that join the cabinet panels.  Lots of work and I still didn't have room to screw on the gaskets that secure the sockets to the trim plate.  

Pics below...
   
   
   

[Silver Rush]

That looks great what brand and model mount is that it looks beefy.

[rose_surfer]

Don't remember exactly but very similar to this one, which is a heck of a deal: [Only registered and activated users can see links Click here to register]

---

you just need to check compatibility of the VESA mounting hole pattern with your TV

[Fiddlehead]

Well done!