Posts: 6
Threads: 3
Joined: Aug 2015
Reputation:
0
Home Port: Oyster Bay New York
Vessel Info: Coronet Harbor Edition, 2001, Crusaders
This is the first year that I'm purchasing Zincs for the boat. Does any one have a list of the zincs needed?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Posts: 494
Threads: 22
Joined: Apr 2012
Reputation:
5
Home Port: Stuart, FL
Vessel Info: 1988 36' Convertible with new 8.1 Crusaders.
Exceptional condition, inside, outside, bilges and engines.
Measure your prop shaft diameter and the size of your existing rudder and trim-tab zincs and the transom zinc if you have one. Also remove the engine pencil zincs from your heat ex-changers. Then go to West or eBay and match them up. You can't go wrong with CAMP zincs. Clean the surfaces real well before you install new ones, they must make a solid electrical contact. Google "How to install zincs" . You need a heavy hammer to bed shaft zincs. Cut off the excess screw length on the rudders with a hacksaw. Capt George