[efontana]

My risers were replaced by the previous owner last year, I was just wondering if the engines need to be pulled in order
to replace risers and manifolds?  There is plenty of room in the middle, but the outer left and outer right sides are pretty cramped,
my previous boat was easy to get around the engine, so I replaced them myself, it only took about 1 hour each.

Has anyone done this? Is the only way to do it to pull the engines, or is it enough to remove the platform?

Thanks.

[jay]

My risers were replaced by the previous owner last year, I was just wondering if the engines need to be pulled in order
to replace risers and manifolds?  There is plenty of room in the middle, but the outer left and outer right sides are pretty cramped,
my previous boat was easy to get around the engine, so I replaced them myself, it only took about 1 hour each.

Has anyone done this? Is the only way to do it to pull the engines, or is it enough to remove the platform?

Thanks.

i just did both engines, rather my guy did.  he is 5'10" probably 175.  we didn't even remove engine housing.  he just dove in through the lifted opening.  took him two days start to finish to remove old and replace new and change oil.  me 6'3" 270.  not a chance!