Author's Statistic:
Posts: 229
Threads: 45
Likes Given: 0
Likes Received: 17 in 12 posts
Joined: Dec 2016
Home Port: Long Island Sound
Vessel Info: 3100 Open, 2002 Model Year, 8.1L Crusaders
Posts: 229
Threads: 45
Likes Given: 0
Likes Received: 17 in 12 posts
Joined: Dec 2016
Home Port: Long Island Sound
Vessel Info: 3100 Open, 2002 Model Year, 8.1L Crusaders
Hs anyone been able to find a paint that sticks to the through hull's? I have tried 2 times with the Rustoleum paint for plastic but it just doesn't stick.
Author's Statistic:
Posts: 661
Threads: 11
Likes Given: 1
Likes Received: 89 in 81 posts
Joined: Dec 2010
Home Port: Kings Park, NY
Vessel Info: 2003 38' Open Cummin's 6CTA's (450 hp)
Posts: 661
Threads: 11
Likes Given: 1
Likes Received: 89 in 81 posts
Joined: Dec 2010
Home Port: Kings Park, NY
Vessel Info: 2003 38' Open Cummin's 6CTA's (450 hp)
I use Awlgrip for thru hulls that sit above the bottom paint. provides a high quality finish near color matched to the hull sides and boot stripe. Scuff them with a scotchbrite pad, then self-etching primer (for metal fittings) followed by topcoat. Regular Awlgrip can be brushed (using proper converter and reducer) or sprayed. It will stick to plastic as long as you get the shine off the plastic. I use a 260 grit wet paper and have had good results.
Author's Statistic:
Posts: 229
Threads: 45
Likes Given: 0
Likes Received: 17 in 12 posts
Joined: Dec 2016
Home Port: Long Island Sound
Vessel Info: 3100 Open, 2002 Model Year, 8.1L Crusaders
Posts: 229
Threads: 45
Likes Given: 0
Likes Received: 17 in 12 posts
Joined: Dec 2016
Home Port: Long Island Sound
Vessel Info: 3100 Open, 2002 Model Year, 8.1L Crusaders