05-31-2018, 03:54 PM
You described the same problem I went through on my 2003 38 Open... There is no magic solution that I'm aware of... Had same problem, even with my long arms...... I purchased brass elbows, extension nipples, & valves for each Racor....After many hrs and removing starboard engine parts I got to the drain on the bottom of the Racor and installed the elbow, extension and ball valve (did the same on the port side)... Now its easy to drain the Racors.... Maybe someone has another answer/solution but that is what I did... M2C.. Good luck.....
