[Opus]

I have a 2008 Sovran 4300.  To check and replace the belts on the engine, I had to remove the large plastic covers on the front of the motor, covering the belts.  The port cover was relatively easy to remove and replace, but the starboard cover is NOT going back on even after 2 hours of attempts.  I removed the generator cover to make more room, but still there is no way to replace the cover exposing the belts and front of the motor.  Any help out there?  Thanks
Scott

---

I have a 2009 Sovran with the same issue. Port side belt had been replaced by previous owner and that cover had been modified to be easily removed. The starboard belt had not been replaced. It took 45 minutes to get it off. Used a dremel to modify the cover to a similar shape as the port side. Common problem according to my Volvo mechanic