[hookup44]

Greetings,

I have a 2002 4100 open and it has a 50 amp shore power receptacle in the bow.  I hooked up a 50 amp 125/250v shore power cord and I'm not getting power to the service panel in the salon.  I confirmed the breakers are on at the dock and the bow receptacle.  I used my neighbor's shore power and cord and still no power.

The boat has another 50 amp shore power connection with an automatic cord reel in the cockpit area.  Is there a switch somewhere on the boat that separates the two 50 amp shore power ports?

On a side note, the automatic shore power cord retractor does't work and I can't test this connection. Has anyone had issues with these too?  It has 13.5v at the motor.  I assume the motor is bad but from the previous owner, it was never used.

Thank you!!!!