12-28-2018, 10:16 PM
Hey reeltimebrad, I started having the same problem with my 2007 Tiara with twin 8.1 Crusaders this last year! I found the same resin debris plugging up my primary filters as well. I looks exactly what you are showing but it looks like you have more of it than I. My starboard engine started experiencing hard starting, stalling and missing. I changed the filters and were back in action. I talked with a Chris Jander at Tiara and he confirmed that the resins inside the tank are dissolving and loosening because of introduction of E-10 gas. I was told when I bought the boat new that the tanks and the engines would accept E-10 but they obviously don't. I have only used E-10 for the past 2 years to my dismay, since I was told it was alcohol free when I started purchasing it from a new marina. Up until this time I was always using 89 octane, alcohol free, and never had a problem. Tiara told me there was no structural problem with the tanks and testing showed no leak potential, which is good. They told me to change the filters more frequently or spend the big bucks to get the tanks cleaned and fuel scrubbed. I like the looks of the fabricated screens you had made. Do you have a supplier? I would be interested in putting some on my fuel pick-ups as well.

