Posts: 702
Threads: 14
Joined: Dec 2010
Reputation:
11
Home Port: Kings Park, NY
Vessel Info: 2003 38' Open Cummin's 6CTA's (450 hp)
11-04-2019, 02:54 PM
(This post was last modified: 11-04-2019, 02:55 PM by ReelMagic.)
Assume you turned the helm switches on the master panel as the lift works from 12 v. . Additionally check the fuses located on the helm station and take a careful look at the switch itself. I had the switch on my boat go bad. Lots of corrosion on the back of switch itself... Good luck.
[Tiara Open] Raise the helm
