03-20-2020, 01:16 PM
Your pump should be running when your compressor is running. Typical cycle is the fan kicks on, determines heat/cooling is required. If so, the water pump is activated. Once water flow is detected, the compressor will kick on.
So I suspect everything is normal.
On older units, the water pump ran continuously.
Sent from my SM-A505U using Tapatalk
So I suspect everything is normal.
On older units, the water pump ran continuously.
Sent from my SM-A505U using Tapatalk


![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)