04-19-2020, 09:15 PM
I have a 1990 3600 Open and the labels for my warning lights are worn off. My manual shows the 4 red lights for each engine so I know what those are for. But I have two green lights that I can’t determine what they are. One of them flickers constantly.
Also my manual is form #921006 but dated 5/88. My actual dashboard and the one shown in the manual are different. Does anyone have a later manual for a 3600 open that might more accurately show what I have:
- My gauges are mounted from behind the panel. The manual shows them with square surrounds on the surface.
- My DC breakers are all mounted to the starboard side vertical panel below all of the warning decals. The manual shows breakers at each switch on the panel forward of the wheel.
Thanks,
Dennis
Also my manual is form #921006 but dated 5/88. My actual dashboard and the one shown in the manual are different. Does anyone have a later manual for a 3600 open that might more accurately show what I have:
- My gauges are mounted from behind the panel. The manual shows them with square surrounds on the surface.
- My DC breakers are all mounted to the starboard side vertical panel below all of the warning decals. The manual shows breakers at each switch on the panel forward of the wheel.
Thanks,
Dennis
