07-29-2013, 04:58 AM
I replaced the risers because they were over heating. The transmission fluid was recently changed.
I had no problems with the trannys until right after the risers were replaced. I believe it's related because I had the starboard risers changed out first, then started having trouble with starboard tranny. It became progressively harder to get in and out of gear, particularly after the running the boat.
I then changed out the port risers and now having same problem with port tranny. Tough to get in and out of gear.
Wondering if somehow mechanic collapsed the end of the tranny coolers when he was working on the risers?
I had no problems with the trannys until right after the risers were replaced. I believe it's related because I had the starboard risers changed out first, then started having trouble with starboard tranny. It became progressively harder to get in and out of gear, particularly after the running the boat.
I then changed out the port risers and now having same problem with port tranny. Tough to get in and out of gear.
Wondering if somehow mechanic collapsed the end of the tranny coolers when he was working on the risers?
