10-01-2020, 01:27 PM
The wiring actually comes up through the hole that your picture has a small bolt in (the brace is resting on it). I never dug mine out, but it's safe to assume that it was run under the cabin head liner. Picture attached, not good, but you can see the bushing in the opening in from of the actuator. The actuator fits in the bracket with no other attachments.
See if you can remove the bolt and maybe someone just pushed the wires down?
See if you can remove the bolt and maybe someone just pushed the wires down?
Thumbnail(s)


![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)