10-19-2020, 06:11 PM
It's not a hard job if you have access to the current raw water pump. Your just swapping it out. Just check the breaker size of your current and new pump to make sure that doesn't need upgraded.
But before you go to all that trouble, maybe just change the hose and nozzle first. That made a difference on my boat when I replaced them this spring.
Sent from my SM-A505U using Tapatalk
But before you go to all that trouble, maybe just change the hose and nozzle first. That made a difference on my boat when I replaced them this spring.
Sent from my SM-A505U using Tapatalk


![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)