11-02-2021, 07:23 AM (This post was last modified: 11-02-2021, 07:24 AM by jmk.)
I would not recommend jumping the motor as a first step. All you are doing is bypassing the pressure switch, but those never short to ground anyway since that is all but impossible the way they are installed. Normally you’d check to see what resistance the motor coil has and check if it is shorted, and take it from there.
Sent from my iPhone using Tapatalk
The following 1 user Likes jmk's post:1 user Likes jmk's post gybe24 (11-27-2021)