[Hemlock_SF]

The chase continues, pulled the panel and was probing the breakers, All was good there. Next I was checking the the engine, house and parallel switch. Engine had 13.5 going in and 3 coming out, after looking a little closer I noticed the parallel bar going to the engine switch had some burn marks on it. Turns out the parallel switch had shorted and melted the switch and the cable a little. The cable going out of the 3amp post of the switch went to a buss bar with 4 wires attached and all 4 wires were metering at 3 amps. Picking up the new switch and the cable in the morning and will try to put back in, it is a pain to get to those switches.

Thanks again for your help Hiccup