[JMGCINCY2023]

Today, everything was working fine on shore power then the dock pedastool went dead.  Only mine.  We could not get the dock breakers to reset.  Being 90 degrees, we started the generator per the manual and both AC's plus everything else ran perfect.  We finally got the dock power to reset but did not plug the cable in.  We shut down the generator per instructions and reconnected the shore power step by step correctly.  Now the AC's will not turn on.  The panel gages show we have full shore power coming into the cabin panel.  Fridge and other appliance panel switches light up and work.  Battery chargers are working.  Are there other breakers we are missing.  We have some pretty experienced dock mates but they are stumped too.  We are running one 30 amp cable with a splitter.  I've tried to run two 30 amp cables but only one will work.

Thanks, Mike