[Roweje]

Hi everyone, I’m looking for help on a power issue, thanks for any insight.
I just purchased a 1997 4000 express (Mid Cabin Express) and brought it from NC to FL. Along the way shore power stopped working after a night at a dock with no circuit breaker on the power pedestal. I’m also getting an ‘over power’ indicator on the inverter panel. The boat is equipped with a Trace engineering inverter which looks to be original factory install. Any idea if there’s a breaker between the power in to the boat and the backside of the panel board located inside the cabin?

I have verified power at the pedestal at the new home port. I’ve turned everything I can find off and allowed for power to discharge. I’ve reset the inverter and it no longer displays the ‘over power’ warning. But I still have no 240v power available on the circuits.

Thanks for sharing your knowledge!

 
I have a 2007 3600 Express, and on mine, I have two breakers under the gunwhale where the power goes in, as well as on the power panel. I was surprised to see two sets of breakers on the shore power. I don’t know if Tiara always did this or just on later models.