[jclark003]

I would check with Tiara. They will probably give the supplier name/part if they don’t have them available.

Water in your engine bed after running could come from a lot of places including leaking exhaust (loose clamps), shaft seal leaking, anywhere along the raw water cooling circuit, AC pump or even a sea strainer. Doubtful keel bilge leaks will make it up into the engine beds. Suggest you get some good earmuffs and go down there while underway or get a camera setup. Placing blue paper shop towels under the engine will also help trace where the water is coming from. You definitely want to find where that leak and address it before it gets any worse.