08-19-2014, 01:19 PM
Well I believe the problem has been solved. with my limited knowledge will try to explain what fixed the problem. I am not an electrician, I know just enough to get me into a lot of trouble, that is why I leave it to the professionals. First we checked the regulators as suggested and found them to be ok. We then called the Charles regulator technician and the only thing he suggested was that it may be the battery heat sensors, we then disconnected the two sensors and nothing changed. We then started to check the alternators on the starboard engine and found that when we moved the wire to the field terminal the voltage went to 13.6V and ran fine (I have owned the boat for 2 years and have never had over 12.4V). We then changed the Port engine over and the voltage went to 13.6V. After a short period of time the alternator on the port engine began to smoke, we shut it down and took the alternator for repair (stator). Put it back on and now it puts out 14.2V. I have run both engines about an hour and everything seems to be ok. We plan to have trip this weekend if anything changes I will let you know. Thanks for all your help.
John
John

