[nukey99]

Not sure what your problem is w/the Glendenning but I have one on my 2003 38 Open and it makes life very easy when traveling and coiling the power cable.... If the cable isn't coming in and appears to be slipping you can remove washers that form the pulley that provides the friction to retrieve the cable.. See the instructions from Glendenning..... I had a slipping problem when retrieving and this solved the problem. Also I clean the cable removing any built up dirt... Tried to use "starBrite" cable cleaner/wax but that made the cable to slippery... Cleaned the cable again w/softscrub to remove the "starbrite" cable cleaner/wax and all is good... Just M2C.

---

You guys have got me rethinking my plan.  I'm going to go down to the boat right now, run the cable all the way out, then go below and watch what is happening when I hit retrieve. 

Last time I took it out, I had to push it in so hard, I was hurting my shoulder, that made me