02-10-2015, 06:45 AM
Took a good look while I was replacing the lighting with led's and no screws...... was able to see the back using a mirror and the only thing I can figure is it is a pressure clip of some sort holding the valance on.
Have tried a sharp tug and no luck, not wanting to damage anything I am afraid to put too much force behind it.
Any ideas?
Have tried a sharp tug and no luck, not wanting to damage anything I am afraid to put too much force behind it.
Any ideas?
Kent
1999 Tiara 35 Open, Cummins
1999 Tiara 35 Open, Cummins

