[kurts52]

Just actually finished mine up today. Got the weather stripping from Tiara. you will need 18ft of 542211 and 9ft of 529092. The 529092 is flat and goes on the window frame. The 542211 goes on the window.  I took the window out by disconnecting the power opener and lifting the window from the outside, up pretty high and working it out. make sure you take note of how high you have to lift it because that is the only height that will allow you to put it back in. Doing this is not real easy in or out. Ive done it a few times. Strip off all the old stuff. I then taped and repainted the window. There are 2 rows on the port, starboard and bottom of the window.  Tiara also has a pdf drawing labeled Sash Gasket Drawing pdf. I strongly advise you to get it from them because the 542211 weatherstrip goes on differently then you might think. If they don't have it, I do, I can e-mail you a copy. Make sure to miter the corners especially at the bottom. These lengths are for my 33 open don't know if other models are different

Kurt