06-20-2016, 06:04 AM
All aluminum needs a primer and I like the zinc chromate. I don't have a radar arch but aluminum is aluminum. I can't imagine the work involved in removing the windshield frames just to paint them. And replacing them again and aligning the holes. WOW. Awlgrip is not very difficult to apply. Mask the area and cover the surroundings with drop cloths.
I have never had a headliner problem on a boat but on a car I poked holes in the liner and used a can of 3M spray adhesive with a long thin tip and it worked pretty well. Usually the foam backing on the headliner fails and that causes the sag.
Good luck, Capt. George
I have never had a headliner problem on a boat but on a car I poked holes in the liner and used a can of 3M spray adhesive with a long thin tip and it worked pretty well. Usually the foam backing on the headliner fails and that causes the sag.
Good luck, Capt. George
