[rose_surfer]

Turned out to just be a bad switch at the helm. I bought the closest replacement I could find at west marine - an illuminated red/white toggle. However I couldn't figure out how to wire it such that it would switch the blowers on and off and illuminate red when on and white when off. The switch I pulled out had three terminals - two yellow wires attached to two terminals and then two grey wires connected together to the third. The new switch has four terminals. I tried every combination I can think of and can get it to switch the blower or can get it to light up but not both. I believe one yellow wire must go to the battery and the other to the blowers, which would make the grey wires the light circuit. I'm thinking maybe I need to jumper the hot wire to the fourth terminal. But perhaps I should try separating the two grey weed and putting them on different terminals. If anyone has done this let me know if you remember the right combination.