(01-23-2017, 02:18 PM)sluggo Wrote: Somehow I think I bent (warped) the steeling wheel, and I would like to have it straightened. I got the cap off, and then there is a nut, I got the nut off, but nothing. I cant tell if there is a retaining ring, or snap clip or not that needs removed. Someone suggested beating on the nut and it should pop lose. So Before I try that, I thought I would ask, and see if there is something simpler. TIA
(it is one of those pretty big (2'?) in diameter wheels with wood on the outside)
I've removed mine, after removing the center bolt, you need a puller, I got one at a local autozone. Mine was the
kind with 3 adjustable grabbers and a center bolt, you adjust it and turn the bolt
on the center, it came off easily.
Mine was similar to this one:
http://www.autozone.com/test-scan-and-sp...ckfit=true
You put the center bolt (with the point) in the center of the bolt (that you removed the nut from), then adjust the grabbers around the stainless ring, then using a wrench turn the center bolt.
Basically like this:
http://continuouswave.com/whaler/referen...00x450.jpg

