[holiday3900]

On our open, I had to basically remove the panels and apply new velcro using both the adhesive on the back as well as reinforce it with a staple gun...  I had good luck with the stiff locking velcro instead of the fuzzy stuff...  If you need to build it up a little underneath, you can place a piece sticky side to sticky side in the middle.

max

Thanks Max. I'll take a panel down and try. Didn't want to undo something before I knew how I was replacing it. might try a little gorilla glue on back of adhesive velcro that goes against wood, too. happy boating. t