Posts: 9
Threads: 1
Joined: Aug 2018
Reputation:
0
Home Port: Lake Erie
Vessel Info: 3600 Open, 2007, 8.1 Crusaders
Do you know what the diameter of the fuel pick-ups are? Did you say you used cork gasket material to re-seal the tank?
Posts: 163
Threads: 12
Joined: Dec 2016
Reputation:
0
Home Port: South haven,mi
Vessel Info: 2006 3200 0pen 8.1 crusaders
I think it was around.835 as .840 is the standard for 1/2-14 pipe threads. I used 1/8 cork gasket material for the access panel but viton rubber would have worked as well and would probably hold up better long term.
Posts: 9
Threads: 1
Joined: Aug 2018
Reputation:
0
Home Port: Lake Erie
Vessel Info: 3600 Open, 2007, 8.1 Crusaders
Do you know of any commercially available screen filters that would work on the fuel pickups? If not, I would be glad to pay you to have you make some up for me. If you made those, you are more talented than I am! Let me know if you are able to help. Thanks!
Posts: 6
Threads: 2
Joined: Jul 2018
Reputation:
0
Home Port: Mays Landing, Nj
Vessel Info: 1994 3100 gas
Great job on those screens. I'm curious how you did that joint. Is it solder? What kind of flux did you use with the stainless? I'd like to make similar screens for one of my forklifts. Rosin core or solid solder wire?
Posts: 163
Threads: 12
Joined: Dec 2016
Reputation:
0
Home Port: South haven,mi
Vessel Info: 2006 3200 0pen 8.1 crusaders
You can purchase wire mesh that is already welded into a diameter with open ends. I used a laser welder to attach the screen to the stainless disc.