[Tiara Open] Replacement for Bomar hatch above seat on 2001 Tiara 3100 Open

[TeamWTS]

We recently purchased a 2001 Tiara 3100, and need to replace the hatch above the helm seat.
I've checked many part sites, and can't find the specific Bomar hatch with the correct dimensions.

Wonder if anyone has found the part # for this, and where you were able to buy one.  
The serial # is no longer visible inside the frame.

Also looking for the quick connect fitting piece for the cockpit raw and fresh water hoses.  Have tried all local marine shops, and hardware stores.  Maybe we have a funky after market setup there.

I'd appreciate any help pointing me in the right direction.  Thanks!

[Misdirection]

Have you contacted Tiara customer support? Brian was able to give me the part number to my portlight on a 1986 Tiara Open! Their customer service is awesome!

Sent from my SM-A505U using Tapatalk

[TeamWTS]

Great - contacting them now. We also need portlights - very happy to hear they can still help with these older parts.
Thanks!

[Beeps]

Great - contacting them now.  We also need portlights - very happy to hear they can still help with these older parts.
Thanks!

We’re you able to get the port windows or hardware from Tiara?whats their phone number? I have 81 Tiara trying to replace the port windows but can’t find them also the 3 on the deck. Any help would be appreciated.

Thanks

[Pknappe]

I got the part numbers for the Bomar hatches on my 1998 3100 from Tiara. They are N1075-10AX-WB for the two smaller hatches and N1022-10AX-WB for the forward larger hatch. I ordered them from Defender as it was a little cheaper than from Bomar (about $700 each for the smaller hatch). 4-6 weeks lead time as it is custom built.