Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
36 ' open 2006 the spot light finish is peeling.
#1
OlUSA Flag Has anyone had any success repainting ?
Like Post Reply

#2
If your light is an ACR, contact them about refurbishing it.  They did mine about 9 years ago, and I have not had any issues since.

Good Luck.
Like Post Reply
#3
I painted my ACR with Awlgrip. wiped it down with lacquer thinner, scuffed it with a scotchbrite pad and sprayed it. looks like new. If your finish is peeling however that may require some extra prep work to get a decent finish. Either that or send it in to ACR as suggested above. Good luck
Like Post Reply
#4
My ACR paint was peeling around the base. From an aluminum body and stainless steel screws. I took it apart, stripped the case, then had it powder coated. Remounted with the screws swimming in dielectric grease. 10 years later and it still looks brand new.


Sent from my iPhone using Tapatalk
Like Post Reply
  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Replacement of Carbon Filter on vent line from Holding Tank. 38 Open ReelMagic 0 147 08-11-2026, 08:58 AM
Last Post: ReelMagic
  2001 38’ Open interior table base removal twilson0929 3 568 07-07-2026, 08:13 AM
Last Post: hiccup
  1996 33Tiara open - shaft seal lubricant leaking Mydiamond 4 1,215 05-22-2026, 06:41 PM
Last Post: Mydiamond
  [Tiara Open] 2001 3800 Open Holding Tank cap that hold sensor and washdown twilson0929 0 670 05-12-2026, 10:18 AM
Last Post: twilson0929
  [Tiara Open] 1993 Open digitart 0 655 05-12-2026, 08:22 AM
Last Post: digitart



Users browsing this thread:
1 Guest(s)

36 ' open 2006 the spot light finish is peeling.00