[sluggo]

are used to open the lazarette, engine hatch, raw water pump etc that are aft, starboard side?  I think I found some, just want to be sure.  TIA

[TIARA44]

Hi,

I just replaced all of mine - easy job.

[Only registered and activated users can see links Click here to register]

The above link is for the actuators, they also have the complete switches as well.

Ken

[johnhesch]

[Only registered and activated users can see links Click here to register]

Waytek has them too ...

[sluggo]

Thanks John and 44!! How to you remove the actuator? I see there is a tool, just slide that under and pop it off?? I think my switches are fine, it's the actuators (buttons) that don't look so good, so this looks like a cheap solution. Any other tips?

[TIARA44]

Get the tool! For a few bucks it goes real easy, they just pop off with the tool. The new ones just snap on. I went with the 'hard' finish vs the 'soft' finish on the switches, it really cleaned up the switch panel.

[sluggo]

John thanks for the info, and this is not your problem but, I ordered from here, and now I have regrets.  First there are minimums on the number you have to buy like say, 5.  No problem I needed 5.  on the tool, you had to order 2 no problem, heck it was only a couple of buck.  Okay at the end it says 'low $ order' have to add $5, which had I known that , I would have bought more.  And the zinger was, we will tell you shipping cost later.  Today I get the bill, $20 for shipping!  $33 buck for $7 worth of stuff.

Now their web site is very good, I guess I could cancel , but didn't feel like it as I would have to start over.  Rant over

[johnhesch]

Ah that stinks! Sorry about that. I tacked mine onto a larger order for work so I never saw the minimums or shipping.

[sluggo]

Ah that stinks!  Sorry about that.  I tacked mine onto a larger order for work so I never saw the minimums or shipping.

not mad at anyone, just an fyi, on one hand, I loved the web site, on the other wanted people to know.