I have a 1986 3600 Continental. I have "discovered" a small array of resistors mounted under the circuit breaker panel, behind the dinette seat back board over the AC unit. These do not appear on any schematics I have. Can anyone tell me what these are for?
I have the same boat, same year. I'll be up over the weekend and check and see if I have the same thing. I do recall reading about resistors being located there. I just can't remember where I read it. I have all of the original documents from my boat and will check them out as well.
(07-03-2018, 07:25 PM)Misdirection Wrote: I have the same boat, same year. I'll be up over the weekend and check and see if I have the same thing. I do recall reading about resistors being located there. I just can't remember where I read it. I have all of the original documents from my boat and will check them out as well.
Sent from my XT1635-01 using Tapatalk
Thanks! I have the original owners manual, no mention of them in there. I didn't find them until I removed the dinette seat back under the CB panels. They are under the railing tray with multiple red wires going t/from.
07-04-2018, 07:31 AM (This post was last modified: 07-04-2018, 09:06 PM by Misdirection.)
I checked my owners manual last night and didn't see them listed either.
I'll be up on my boat Friday and will check them out. The previous owner of my boat labeled everything with masking tape with writing on it. So if he ever came across them, he may have done so.
I checked on my boat and found the resistors. See picture. I have no idea what these are for and they are not marked. I may trace the wires if I have time to see where they come from / go too.
(07-07-2018, 12:30 PM)Misdirection Wrote: I checked on my boat and found the resistors. See picture. I have no idea what these are for and they are not marked. I may trace the wires if I have time to see where they come from / go too.
Sent from my XT1635-01 using Tapatalk
it looks like resistors and diodes in series. The resistors all look to be the same size. My guess is that if you trace them out the are going to led indicator lights and the resisters are lowering the voltage.