Posts: 3
Threads: 2
Joined: Aug 2019
Reputation:
0
Seems like the Velcro that holds the front of the headliner in 3200 won’t hold. Despite me trying to reattach it eventually droops.
Any suggestions on repair to get it to stick tight? Thanks
Sent from my iPhone using Tapatalk
Posts: 463
Threads: 3
Joined: May 2018
Reputation:
7
Home Port: Ashtabula, OH
Vessel Info: 1986 Tiara 3600 Open, Crusader 454's
10-07-2019, 06:14 PM
(This post was last modified: 10-07-2019, 06:14 PM by Misdirection.)
On my 36 the previous owner took two pieces of teak, maybe 2" x 4" and beveled the outside edge, drilled pilot holes and screwed them on thru the ceiling panel, I'm assuming to address a sagging issue. It blends right into the boat.
If I ever need to address a sagging, I think I would install teak rod holders on the ceiling panel. That way I'd solve two problems at once.
Just make sure your screws don't go all the way thru the fiberglass!
Sent from my SM-A505U using Tapatalk
