06-29-2014, 01:10 AM
Anyone ever install a jet ski on the 3200 swim platform?
I believe it is too heavy.
400 to 800 pounds.
I believe it is too heavy.
400 to 800 pounds.
Thread Rating:
![[-]](https://www.tiaraownersclub.com/forum/images/netpen-pro/collapse.png)
07-23-2014, 05:52 PM
No, it will not hold.
You would have to take if off and build a newer unit to handle 800lbs.
A Yamaha VX cruiser would chime in at 688lbs with 18.5 gallons of fuel.
I'm thinking about doing the same to our 2900 open.
I am semi-pro at fabrication and hydraulics....so I fall under the rules of "possibility".
Most likely, the transom would need to be reinforced, and to do this would require removal of the engines.
So it's basically a winter job.
And also you would want your "new" swim platform to be hydraulic.
Expect a price of $15K for a company like TNTlifts.com.
Best regards.
Greg
Clearwater Florida.
You would have to take if off and build a newer unit to handle 800lbs.
A Yamaha VX cruiser would chime in at 688lbs with 18.5 gallons of fuel.
I'm thinking about doing the same to our 2900 open.
I am semi-pro at fabrication and hydraulics....so I fall under the rules of "possibility".
Most likely, the transom would need to be reinforced, and to do this would require removal of the engines.
So it's basically a winter job.
And also you would want your "new" swim platform to be hydraulic.
Expect a price of $15K for a company like TNTlifts.com.
Best regards.
Greg
Clearwater Florida.
| Users browsing this thread: |
| 1 Guest(s) |