Posts: 155
Threads: 25
Joined: Mar 2013
Reputation:
0
Home Port: Tierra Verde Florida
Vessel Info: 2002 38 Open w/Cummins 6cta's 8.3 450 hp
Mine were cleaned about 2 years ago, just before I bought my 2002 38 Open. I was headed away for vacation on the boat the other day and noticed excessive white smoke out of one exhaust. I turned around and went back to the dock. Called my mechanic. He came out and discovered that both aftercoolers were ruptured. One slightly and one a little more so. I'm not looking forward to the repair bill on this!
Posts: 494
Threads: 22
Joined: Apr 2012
Reputation:
5
Home Port: Stuart, FL
Vessel Info: 1988 36' Convertible with new 8.1 Crusaders.
Exceptional condition, inside, outside, bilges and engines.
I always ask "Do you change the zincs regularly?"
My '88 Crusader antifreeze heat exchangers were still good when I sold the boat in 2005.
My Volvo diesel oil coolers failed at 4 years because of poor soldering at the tube ends and I was able to re-solder and pressure test them.
Sometimes when they acid clean them it weakens the walls.
I guess it's a matter of luck. I wish you luck. Keep us informed.
Capt. George
Posts: 261
Threads: 9
Joined: Jul 2011
Reputation:
4
Home Port: Daytona Beach, FL
Vessel Info: 2000 Tiara 3500 Open
Cummins 6bta -370
I would guess and this is of course without seeing anything, that they MAY have put the wrong O ring on the end plates OR not put together correctly allowing salt water to enter the AC which then caused oxidation from the aluminum housing which then caused expansion and rupture. Take a look at SBMAR.com and boatdiesel.com and you will notice you are not the first for this to happen.
Tom