Posts: 80
Threads: 1
Joined: Mar 2016
Reputation:
0
Home Port: Newport Beach,CA
Vessel Info: I work for the Westcoast Tiara dealer Silver Seas Yachts. I'm one on the lucky few who gets to try all the models and engine combos.
01-05-2017, 05:32 PM
(This post was last modified: 01-05-2017, 05:42 PM by bigboatben.)
You get pretty good airflow through the windshield vent and hard top opening hatches. If I were looking to purchase one of these boats I would try to find one with the optional cockpit heat and air-conditioning. As a Tiara salesperson and broker I find the 4400 to be a hard sell due the cabin/salon layout. If I personally was looking for a big Tiara cruiser I'd find the best Tiara 5200 Express I could afford and buy it! The whole layout of the boat is much better. If you go look at both of them you'll see what I mean. Good luck! Hope this helps
Sent from my iPhone using Tapatalk
Posts: 63
Threads: 11
Joined: Feb 2014
Reputation:
1
Home Port: Coral Gables, FL
Vessel Info: 2007 Tiara Sovran 4300
I have a 43 Sovran with 2 AC units supplying the cockpit (total 32,000 BTU). One unit keeps the cockpit fairly cool on days when it is in the 70's or low 80's. Anything more than that requires both units running to really keep it cool. The 2 units really do a good job in the Florida heat and sun.
Posts: 2
Threads: 1
Joined: Nov 2016
Reputation:
0
Home Port: San Francisco
Vessel Info: Past owner of a 1998 40 Express w/ 3208s
Thanks everyone!
I wish a 52' would fit in my boat slip. Still considering the 47' for the SF Bay & Delta....
Posts: 4
Threads: 1
Joined: Aug 2011
Reputation:
0
I owned a 2006 Sovran 44, sometime called 47 for 4 years and it was a great running boat, easy 25 kt cruise with Cummins 660s. I had cockpit air and on those hot days would be very comfortable with it running. We boated in New England. I liked everything about her except as mentioned in a prior response, the cabin was a little closed in. I'm 6 feet over 200 lbs and was able to service both sides of the engines, generator was more difficult to get access other than routine stuff, had to remove the aft hydraulic table for full access.
Bob