Posts: 4
Threads: 1
Joined: Aug 2016
Reputation:
0
Home Port: Holland MI
Where can I take exhaust risers and manifolds to get cleaned and inspected in West Michigan? The boat was in salt water and now is in fresh water. Motors are Crusader 8.1s
Posts: 486
Threads: 3
Joined: Apr 2013
Reputation:
20
Home Port: Lake Michigan
Vessel Info: 52 Sovran, Cat 3406
Pretty sure the exhaust manifolds are inside the coolant loop on those engines and not subject to sea water corrosion. As far as the risers go if you want to clean them you can try a radiator shop. Ive had good luck with the shop over by west marine in Holland. Otherwise you may want to look into replacing them as a preferred option. Crusader offered a "heated riser" option which I think runs coolant through a half raiser, with raw water exiting the top. so check which version you have before ordering any new parts.
A good radiator shop can also clean your hear exchanger core if needed. There are products that will chemically clean them as well.
Good luck
Posts: 486
Threads: 3
Joined: Apr 2013
Reputation:
20
Home Port: Lake Michigan
Vessel Info: 52 Sovran, Cat 3406
ME is a great full service outfit. They know what they are doing and take pride in their work. They also know Tiaras inside and out. When I require any work it goes to ME. if you are looking to contract the work definitely give them a call.