Posts: 3
Threads: 1
Joined: Feb 2018
Reputation:
0
Home Port: Grand Haven, MI
Vessel Info: 2017 F44 w/IPS600
03-15-2018, 08:55 PM
(This post was last modified: 03-15-2018, 08:57 PM by Snook.)
I recently purchased a F44 with a Freedom lift. I am looking at a couple of options for a dinghy for this unit. I have spoke with both Tiara reps. and Freedom lift reps. with little results. I am partial to the Avon 340 SeaSport which is a 11'2" vessel that has a combined weight of approx. 650lbs. The other is an AB ALX 11 which is 11'6" and 450lbs. Seems no one can tell me which dinghy this boat will handle effectively. The fact that the Freedom lift is positioned aft of the swim platform is a concern for me. I realize that going with a 10 tiller vessel is the safe bet but I like the comfort of a wheel dinghy. I suppose the newness of this model is the biggest problem in finding anyone with an educated answer to this.
Any thoughts on my best solution? Any input would be appreciated.
p.s. I have the IPS600 drives on this vessel.
Posts: 3
Threads: 1
Joined: Feb 2018
Reputation:
0
Home Port: Grand Haven, MI
Vessel Info: 2017 F44 w/IPS600
In all fairness to the people at Tiara, I realize that once I stray from the factory options, it opens up all kinds of possibilities which they can't possibly be expected to be experts on. I apologize for my lack of understanding and complaining when I had no legitimate complaint.
Again my apologies.
Posts: 3
Threads: 1
Joined: Feb 2018
Reputation:
0
Home Port: Grand Haven, MI
Vessel Info: 2017 F44 w/IPS600
Thanks for the input and the compliments on the boat. Yes, I pulled the trigger on that boat. BigBen, from Silver Seas Yachts and this site, has been extremely helpful. We shared several emails and he even called me to discuss my concerns further. I finally decided on an AB ALX with the new Yamaha F25 outboard. I think this outfit will come in at around 425lbs. I was tentative about going much heavier. Perhaps we will cross paths over this season. I'll keep a look out as we visit Saugy several times each summer. Love the place!!
Thanks again.
Posts: 1
Threads: 0
Joined: Mar 2018
Reputation:
0
I just bought a F44 and am going through the same process with the tender. I have older teenage boys who want to ski behind the tender. Ideally, I’d like to get a BRIG 380 (12’6” x 6’4”) with a 50hp (675 lbs total). Also considering a 340 (11’2” x 5’ 10”) with a 40hp (610 lbs total). I have the hydraulic platform which supports 1000lbs. Very concerned about the weight / overhang and the performance impact on the boat. Tiara does not seem too concerned. Any thoughts? How has your experience been with the 340?