Posts: 23
Threads: 6
Joined: Jun 2018
Reputation:
0
Home Port: Georgian Bay and North Channel of Lake Huron
Vessel Info: Tiara 4000 Express Cruiser, 1997, Twin Cummins 8.3 Diesel engines
Hello Folks; my wife asked me to inquire about a black superficial film that appears on the gelcoat finish after our Cummins 8.3 engines have been running for awhile. It is absolutely superficial and has not penetrated the surface at all. She is a cleaner and this does bother her. The boat is of the 1997 vintage. Could the engines somehow be out of adjustment causing the diesel fuel mixture to be too rich? Incomplete combustion? What else could be wrong? Or is this normal and to be expected in an older boat?
More importantly what can we do to eliminate or reduce this problem? Any fuel additives that would help?
Any assistance will be greatly appreciated. Fuzzdr
Posts: 705
Threads: 14
Joined: Dec 2010
Reputation:
11
Home Port: Kings Park, NY
Vessel Info: 2003 38' Open Cummin's 6CTA's (450 hp)
I have a 2003 38 Open w/Cummins 6CTA's and get a small black film near the exhausts after running long periods..... Easily removed but was told to remove/clear the AFTERCOOLERS.. Did just that and problem disappeared... Not sure if you have done that or not but would recommend doing it.....Solved my problem.... Will do again this coming winter as there were last done in 2011.... Have about 600 hrs on them since they were done.... M2C
Posts: 23
Threads: 6
Joined: Jun 2018
Reputation:
0
Home Port: Georgian Bay and North Channel of Lake Huron
Vessel Info: Tiara 4000 Express Cruiser, 1997, Twin Cummins 8.3 Diesel engines
Thanks for your note ReelMagic. Interesting- no I have not removed and cleared my Aftercoolers. Not even sure how I would do that? I have only had this 1997 Tiara 4000 Express for 3 weeks now. I do have lots to learn as it is very different and larger than my last boat. But the learning process is fun! Fuzzdr
Posts: 486
Threads: 3
Joined: Apr 2013
Reputation:
20
Home Port: Lake Michigan
Vessel Info: 52 Sovran, Cat 3406
Some soot is normal. Is it happening more on one side? How many hours on boat? Salt or fresh?
After coolers if plugged on the air side can cause your engines to soot. You should check your engines maintenance schedule and past history to determine if a cleaning is in order. before heading down that route I would first inspect the air cleaner as if that is restricting airflow you will most certainly soot up the transom. Other culprits include fuel pressure (sucking air through a fitting, Racor or secondary filter), bad injector or warn turbine/hot housing off the turbo which may be accompanied by somewhat poor mid range acceleration.