Posts: 215
Threads: 94
Joined: Oct 2018
Reputation:
1
Home Port: ludington michigan
Vessel Info: 2003 4200 open qsm 11 660hp
buying a 2006 0r 2005 4200 open with cummins qsm 11 660 hp, i troll for salmon on the great lakes, will this boat troll at 2mph without me putting trolling valves on???? i was told by broker that they have a low rpm and would be able to do it???? and if it WILL NOT approx cost of adding trolling valves ???? thank you very much ......
Posts: 39
Threads: 1
Joined: Jan 2017
Reputation:
0
Home Port: Michigan
Vessel Info: Tiara 38 OPEN, 2005 Cummins 480CE
10-31-2018, 03:03 PM
(This post was last modified: 10-31-2018, 03:09 PM by Ridin'High.)
I don't think the slow idle switch will get you where you want to be. I have a 38 open with 480CE Cummins and with both engines in gear I am over 5 mph at the normal 600 rpm idle. Faster then you can run in most canals. The slow idle switch drops the idle speed by 50 rpm to 550 rpm. Even when I do that with one engine in gear I am still over 2 mph throwing a small wake at the point. I would be surprised if the 42 with that power would be able to get under 4 mph with trolling valves. You could always have the sales representative prove what he is saying is true.
Sorry, I meant to say that I would be surprised if you could "get under 4 mph WITHOUT trolling" valves in my last post
Posts: 215
Threads: 94
Joined: Oct 2018
Reputation:
1
Home Port: ludington michigan
Vessel Info: 2003 4200 open qsm 11 660hp
10-31-2018, 03:35 PM
(This post was last modified: 10-31-2018, 04:18 PM by honest mark.)
thanks deck hand........i think im gonna have to get trolling valves........
sorry, i mean riding high =)......i am new to the board, lol
Posts: 158
Threads: 2
Joined: Dec 2010
Reputation:
4
Home Port: Lake Michigan
Vessel Info: 2003 42 Open - Cat C12
Agree with above... We have 715HP Cat's in our 42. Low idle (550rpm) the boat makes around 6kts. High idle at 700rpm we're making closer to 8kts and a wake. Even in low on 1 engine (24 degrees of rudder to compensate), we're still making 4 kts.
max
Posts: 486
Threads: 3
Joined: Apr 2013
Reputation:
20
Home Port: Lake Michigan
Vessel Info: 52 Sovran, Cat 3406
most manufacturers limit the amount of low idle time to short intervals for docking and such. Check your operator guide to be sure.
Posts: 463
Threads: 3
Joined: May 2018
Reputation:
7
Home Port: Ashtabula, OH
Vessel Info: 1986 Tiara 3600 Open, Crusader 454's
11-02-2018, 08:37 AM
(This post was last modified: 11-02-2018, 12:11 PM by Misdirection.)
Alot of the big boats down here on Lake Erie run trolling bags to get down to walleye speeds (2 mph). While trolling valves are the way to go, you might want to look into a pair in the short term. That and deploying your trim tabs all the way will shave a little off your speed as well. Good Luck.
Sent from my XT1635-01 using Tapatalk
Posts: 215
Threads: 94
Joined: Oct 2018
Reputation:
1
Home Port: ludington michigan
Vessel Info: 2003 4200 open qsm 11 660hp
11-03-2018, 08:09 AM
(This post was last modified: 11-03-2018, 08:15 AM by honest mark.)
thanks misdirection.....
i heard that even with trolling bags deployed that you cant get it down to 2mph ???? i use trolling bags now and have no issue with them, i was told by another captain that trolling valves are a MUST, if you expect to get down to 2mph>??i would love to use trolling bags, way cheaper than valves.....
Posts: 4
Threads: 2
Joined: Jun 2018
Reputation:
0
Home Port: Southern California
Vessel Info: 2008 Tiara 42 Open with twin Cummins 670hp
I have a 2008 42open with the same cummins and my slowest speed on low idle with two engines is 6, with one in gear, it's 4. I can only go two if I forget to untie from the dock!
Posts: 463
Threads: 3
Joined: May 2018
Reputation:
7
Home Port: Ashtabula, OH
Vessel Info: 1986 Tiara 3600 Open, Crusader 454's
I have a friend with a 38' Rampage with diesel's and trolling valves. I asked him and he said he can almost get down to 1 knot.....
Sent from my XT1635-01 using Tapatalk