Posts: 1
Threads: 1
Joined: Apr 2019
Reputation:
0
Home Port: So Florida
Vessel Info: 2002 3800 Open with Cummins 6cta diesels
I have 2002 3800 Open(dual tanks and guages) My port gauge is working but my starboard gauge stops at 3/4 tank and will not go lower. When I fill the tank, it does go back to full but when it reaches 3/4 it stops. Any insights as to what could cause this and if there is a fix are appreciated.
Cheers.
Posts: 463
Threads: 3
Joined: May 2018
Reputation:
7
Home Port: Ashtabula, OH
Vessel Info: 1986 Tiara 3600 Open, Crusader 454's
I posted a reply a few days ago on how to troubleshoot a fuel gauge, you might want to go look at it.
To test the fuel gauge, disconnect the pink wire (sender). Turn on your ignition switch. The gauge should read empty. Ground the pole where the pink wire went to the black wire and it should read full. If both of those are true, your gauge is fine. Reconnect the pink wire. You then need to check at the sending unit. Disconnect the pink wire and ground it out. If that works you have a bad sending unit. If it doesn't work you have a wiring issue.
Sent from my XT1635-01 using Tapatalk