Posts: 16
Threads: 7
Joined: May 2019
Reputation:
0
Home Port: Newport, RI
Vessel Info: 2002 Express with Cummings
Can someone please assistant me with voltage gauges they don’t read anything, but boat is running fine. I have had problems in the past month with the oil gauges. We did do the manual gauges and now the oil pressure is fine according to the manual gauges. Why don’t I have a reading on my voltage gauges? Any help would be great.
Posts: 16
Threads: 4
Joined: Dec 2018
Reputation:
1
Home Port: St Pete Fl
Vessel Info: 2005 Tiara 2900 Coronet, 8.1 Crusaders
First step is the check the pins on the back of the gauge with a voltmeter. Just pull the dash back to access. the volt gauges are easy. The wires at the top are for the backlighting, the two on the bottom are positive and negative. If you have voltage on the back then the gauges are bust, otherwise you need to keep tracing the wires back to find the problem. Many times its a grounding problem.
Posts: 11
Threads: 3
Joined: Dec 2019
Reputation:
0
Home Port: South Florida
Vessel Info: 1989 Tiara 2700
Twin FWC Mercruiser 350 in boards
Hi
Wally man is on point. I was having similar issues and it turned out to be the ground wires. clipped added the female end and works great now