4000 Express davit system
#1
   
           
For all those 400 express owners struggling to come up with a viable davit system I wanted to share my solution.  Just finished installation and can't wait for spring to give it a try.
Reply
#2
Interesting, I have a few questions of questions:
1. Do you take the arm off after you stow the dinghy?
2. How is the cradle mounted? toggle bolts? or did you find the stringers? or major surgery to put in a backing plate?
3. who makes the cradle? is it removeable?
Reply
#3
The crane "arm" does not get taken off. It pivots out to lift and place the dinghy. It's high enough to clear the open trunk. I made the cradle myself. I own a manufacturing company so I have all the machines and tools required. I used a modified version of the VersaChock deck mounts. Again, I have a metal shop so I was able to fabricate much larger backing plates and install them the same way VersaChock does theirs. once I had the holes in the platform I plugged them with a plate on the bottom held up by a wire and poured that epoxy that is for fixing rotted wood so it was absorbed by the core material. Maybe not an engineered solution but I think it will work. I'll follow up with more info once I'm in the water. Which may not be until July the way Midwest weather is going!

https://www.versachock.com/products/deck-hardware/
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  1995 3500 Express LFP/Inverter Install penneyma 0 706 09-09-2026, 07:09 PM
Last Post: penneyma
  4000 Express Swim Platform Repair Jack Aperio 3 1,697 01-01-2026, 02:03 PM
Last Post: Jack Aperio
  4000 Express tender/davit install Jack Aperio 7 6,224 05-31-2025, 09:05 AM
Last Post: Jack Aperio
  2000 3500 Express Hardtop Hand Rails JMGCINCY2023 0 1,838 01-30-2025, 09:22 PM
Last Post: JMGCINCY2023
  4000 Express New Exterior Upholstery Jack Aperio 5 2,195 11-29-2024, 11:17 AM
Last Post: Richard.Janek



Users browsing this thread: 1 Guest(s)
Advertisements

>