Posts: 63
Threads: 11
Joined: Feb 2014
Reputation:
1
Home Port: Coral Gables, FL
Vessel Info: 2007 Tiara Sovran 4300
I just brought my boat in for annual service and the belt tensioner is squealing on one of my Volvo's. I understand this might be a common occurrence. Has anyone else had this issue?
Posts: 158
Threads: 2
Joined: Dec 2010
Reputation:
4
Home Port: Lake Michigan
Vessel Info: 2003 42 Open - Cat C12
Which motors do you have 500 or 600? Which belts do you have on the boat? Are they the green gates belts or the "new" gator backed VP belts? Do you still have the original plastic pulley's or the metal upgraded?
Posts: 63
Threads: 11
Joined: Feb 2014
Reputation:
1
Home Port: Coral Gables, FL
Vessel Info: 2007 Tiara Sovran 4300
IPS 600 with the upgraded metal pulleys. New VP belts.
I know that I am replacing one and I was going thru the invoices from the original owner and he did 2 replacements.
Posts: 453
Threads: 30
Joined: Feb 2013
Reputation:
0
I have run across this issue quite a bit over the last few years, even on boats with the upgraded pulleys. I am not sure exactly what is going on, but when we run across one like this, we call Volvo and they come out and usually replace the pulley's and belts. I have seen belts being replaced by owners with aftermarket belts (non Volvo) that seemed to be worse. According to a Volvo technician that I spoke with, the aftermarket belts begin squealing fairly quick for some reason.
I sold a 2008 Tiara 3900 Sovran not too long ago that had the issue and Volvo replaced the pulleys and belts and it performed flawlessly with no squealing issues.
Good Luck!
Posts: 63
Threads: 11
Joined: Feb 2014
Reputation:
1
Home Port: Coral Gables, FL
Vessel Info: 2007 Tiara Sovran 4300
The cause of the belt tensioner failure was found to be a dampener on a pulley in front of the tensioner. The dampener had a wobble that caused the pulley to wobble causing the belt to wobble into the tensioner. I believe the issue is fixed.