Does anyone know how to remove the access panel on the port dash of the 43 open so that I can fix the sliding hatch door. The screws have vibrated out.

Hi, I am getting a custom mattress made for the V berth in the 1989 33' Tiara Open.  Does anyone have any recommendations for sheets?  Do I just use Twin sheets and make it work, or are there options for the model?  Thanks!

Does anyone know of an available synchronizer for Cummins 6BTAs? If not, I may be interested in designing one. If I do, would anyone be interested in it?

Just purchased her in October. Looking forward to many years of boating and fishing on the east coast and maybe haul to Panama City in the winters. 

Hi everyone! I am a new owner of a 2001 5200 Express and was looking to add a freshwater filtration system to the boat during the winter. Does anyone have a freshwater system diagram of this boat they could send me? I cannot seem to find one. Thank you in advanced.

Greetings,

I have a 2004 4200 Open and have discolored water dripping through the ceiling panel. There are signs the seal in the hatch is leaking, but I'm having difficulty removing the ceiling board to fully ascertain the damage and to dry out the ceiling boards/replace vinyl. It seems the screen/sunshade must be removed first because it prevents removal, but there are no visible fasteners or method recognizable. My only thoughts are the hatch assembly has to be removed first. 

I wanted to see if anyone has any experience and best way to remove the panel. I'd like to think the ceiling board could be removed without removing the hatch. Also, I assume BOMAR is the best option to get new seals.

Best regards and thanks!

Clay Platt

I recently converted from the actuator lift to a hinge lift system.  Actuator worked when removed and is no longer needed.  These are not the easiest to find, not cheap and can take 6-months to a year to get.  Would be a very nice backup if yours ever fails.  
$250 plus shipping.
Thanks,

We have a 2004 Tiara 3200 Open.  After heavy rain the forward bilge has quite a bit of water.  Due to the V of the hull at that point, the bilge pump leaves several gallons unpumped.  I'm talking about the forward bilge -- below the companionway steps.  Engine room and aft bilge stay relatively dry.

Anyone else with this issue and an idea where the water is coming in?  I taped off the chain locker hatch before the last rain and still got water in the bilge.  No signs of leakage anywhere in the interior.

Thanks in advance for any clues.

1993 3100 open 454s. Anyone try replacing the carbs with those injector kits?

Hi does anyone know how the wiper arms come off on 1989 3100 open. They appear to be a spline and press fit but not sure if there is a hidden catch to lock so can wiggle and release. No way to put a puller on as the top is closed. Thanks for any help!