We have a 1989 Tiara 33 Open and the door lock on the smoked black glass sliding door was damaged.

Anyone know where we can get a replacement.Tiara says that Florida Marine Door went out of business.

Hello fellow Tiara owners,

My wife and I are second year owners of a 2012 Sovran. We love the boat and use it frequently. Our home port is in Narragansett Bay. We enjoy boating through out the northeast.

Hi. we are trying to replace the privacy curtain on our 3100 open. The track is still on the ceiling, but we don't have the original curtain. I can't figure out what slides into the track. Does anyone have any pictures of what slides work with it? It's not rounded, nor does it hold anything with rollers like others I've seen. It's a flat track with what looks like a flat groove in it.

Hello all...

Just picked her up and the wife is upset it doesn't have one....

Thanks all and Happy Boating

DJ

Does anyone know the Gel Coat Color or formula to mix.  Any recommendations as to products.  Just have a couple small stress cracks and a couple of dings from rafting up.

Thanks, Mike

3500 Open Original bridge deck enclosure, unused

Any advice on finding parts boat?
The rudder I need is 26171 Algonac casting
519-401-7681

I have 2001 31’open.
My issue is with the shower sump pump .
Where is its location and accessibility?
I’ve had the boat for. 3 years and the pump has cycled every 2-3 minutes .
That has recently stopped.
How do I check the pump to see if it still functions?

Have been troubleshooting fuel problems on my 1996 Tiara 3100 with 454 XLi s.  Measured voltage at fuel pump.  When turning key only get 10.5 volts at starboard fuel pump.  Measure 12+ volts at port fuel pump.  Anyone experienced this before?

Hey group I'm looking for some help sourcing an original replacement or a suitable alternative. 

1997 Tiara 40 mid cabin express cruiser with the inverter option. 

Main panel A/C section has a 3 pole 4 position selector switch made by AMP Tech LLC Tiara Part#3291230
The selector switch options are
1) 120v Shore 
2) 240v Shore
3) Generator
4) Inverter

Tiara no longer carries the part and I have not had any success reaching the original manufacturer for a suitable replacement. 
The selector switch is a rotary switch mounted on a circuit board with 15 wires connected to it. I have traced and labeled all the wires but am unsure how I might be able to successfully connect everything to a cam style rotary switch. I have found something on Grainger.com but am concerned it may not accept all the needed connections.

Thanks for any assistance!